Abstract

Properties of pure metals can be enhanced by alloying with other metallic or non-metallic elements according to the need. However, as multiple alloying elements in an alloy may lead to the formation of many intermetallic compounds with complex microstructures and poor mechanical properties, new types of metallic alloys called high entropy alloys with at least five elements with equimolar ratios were developed. In this study, FeNiAlCuCrTi x Nb y (x, y = 0, 0.5, 1.0, 1.5) alloys have been prepared using Ar arc melting technique. Microstructural studies using scanning electron microscope and XRD showed that Ti addition promoted secondary BCC2 phase whereas, Nb acted as FCC stabilizer. Samples with combined Nb and Ti addition showed FCC1 and FCC2 structure with Nb-rich FCC2 dendritic phase as dominant phase. Though, individual Nb and Ti additions have resulted in increased hardness, combined additions have resulted in highest hardness of 797 HV under 1 kg load.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.