Microstructure and grain boundary relaxation in ultrafine-grained Al/Al oxide composites

Abstract

The microstructure and grain boundary relaxation in ultrafine-grained Al/Al oxide composites were studied by electron microscopy observation and internal friction measurement, respectively. Both the microstructure and the internal friction behavior of the composites were strongly influenced by the thermomechanical treatment parameters. All the Al particles were still covered by the native amorphous oxide shells in those composites sintered at T < 823 K, and no indication of Al grain boundary relaxation was detected. Some Al oxide shells were cracked, resulting in the formation of a few Al–Al grain boundaries between adjacent particles in the sample sintered at 823 K, and one internal friction peak centered at ∼440 K was detected. All the oxide shells were broken into small fragments in those samples sintered at T ⩾ 843 K, and two internal friction peaks were detected, one prominent peak at ∼440 K and one weak peak at ∼540 K. A microstructure with a bimodal grain size distribution of Al was formed via partial recrystallization after thermomechanical treatment of the sample sintered at 893 K, and two internal friction peaks with comparable intensity were detected. The internal friction peaks were associated with the relaxation of Al grain boundary in the composites.