Abstract

A kind of web-like carbon with interconnected nanoribbons was fabricated using bacterial cellulose pyrolyzed at various temperatures, and the microwave dielectric properties were investigated. Bacterial cellulose was converted into carbonized bacterial cellulose (CBC) with a novel three-dimensional web built of entangled and interconnected cellulose ribbons when the carbonization temperature was below 1,200°C; the web-like structure was destroyed at a temperature of 1,400°C. Composites of CBC impregnated with paraffin wax exhibited high complex permittivity over a frequency range of 2 to 18 GHz, depending on the carbonization temperature. Both real and imaginary parts were the highest for CBC pyrolyzed at 1,200°C. The complex permittivity also strongly depended on CBC loadings. For 7.5 wt.% loading, the real and imaginary permittivities were about 12 and 4.3, respectively, and the minimum reflection loss was -39 dB at 10.9 GHz. For 30 wt.% loading, the real and imaginary permittivities were about 45 and 80, respectively, and the shielding efficiency was more than 24 dB in the measured frequency range and could be up to 39 dB at 18 GHz. The electromagnetic properties were assumed to correlate with both the dielectric relaxation and the novel web-like structure.

Highlights

  • The rapid proliferation of advanced electronic devices for many commercial and military applications, such as data transmission, telecommunications, wireless network systems, and satellite broadcasting as well as radar and diagnostic and detection systems, has led to numerous electromagnetic compatibility and electromagnetic interference (EMI) problems

  • Characterization The morphology of carbonized bacterial cellulose (CBC) was observed by transmission electron microscopy (TEM, Tecnai F20, FEI, Hillsboro, OR, USA) and scanning electron microscopy (SEM, FEI NOVA600i)

  • The sheet resistance (Rs) of the composites was measured by the four-probe method using a Keithley 2400 multimeter (Cleveland, OH, USA), and the direct current (DC) conductivity σ was obtained using the measured Rs and the sheet thickness t according to σ = 1/(Rst)

Read more

Summary

Introduction

The rapid proliferation of advanced electronic devices for many commercial and military applications, such as data transmission, telecommunications, wireless network systems, and satellite broadcasting as well as radar and diagnostic and detection systems, has led to numerous electromagnetic compatibility and electromagnetic interference (EMI) problems. Researchers have tried low-cost natural materials (rice husks) as carbonaceous sources to fabricate carbonmatrix composites with self-assembly interconnected carbon nanoribbon networks [10]. These composites have higher electric conductivities and EMI shielding effectiveness values than those without. The example of microwave composites is reported using bacterial cellulose as the carbonaceous source, which had self-assembled interconnected nanoribbon networks These composites exhibited high permittivity in the frequency range of 2 to 18 GHz and could be excellent high-loss materials, for example, as an EMI material or high-performance microwave absorbing material. The interesting electromagnetic characteristics are due to the novel three-dimensional web-like networks which establish additional electrical conduction pathways throughout the whole system

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call