Abstract
The effects of four different microstructures in the titanium aluminide alloy Ti24Al11Nb (at.%) on the fatigue crack growth behavior of small surface cracks and large cracks have been investigated. The four microstructures were a Widmanstätten basketweave, a Widmanstätten aligned colony, an equiaxed primary α 2 in a Widmanstätten matrix and a completely equiaxed α 2 structure. Small cracks were found to develop arbitrary shapes owing to the effects of microstructure. The crack shapes (aspect ratios) were measured using a laser interferometric and photomicroscopic system, and these measurements allowed accurate calculation of crack growth rates at the surface position as well as at the depth position for the surface cracks. After accounting for the continuous variation in crack shape in crack growth rate calculations, the trends in small-crack growth rates agreed reasonably well with the corresponding large-crack growth rates. While the crack growth rates at depth positions for small cracks correlated well with large-crack data in the basketweave microstructure, crack growth rates at surface positions correlated well with the corresponding large-crack data in the other microstructures. The microstructural factors that may be responsible for this behavior are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
