Microstructural study of a natural slip zone: quantification and deformation history

Abstract

Microstructure of a natural slip zone was comprehensively examined using a combination of images captured systematically by optical microscopy (OPM) and backscattered electron microscopy (BEM) techniques. Microstructural features identified on these images were processed and evaluated using an advanced image analysis system, which proved that quantitative analyses could considerably enhance the understanding of shear behavior of slip zones. It was found that variations of porosity, abundance of platy clay particles and alignments of particles are significant indicators revealing nature of deformation processes. These indicators show that global mechanical behavior of the investigated slip zone can be conceptualized as that of normally consolidated clayey soils under drained conditions. The geometric patterns of the microstructure of the slip zone are similar to the S–C fabrics seen in tectonic shear zones. It is suggested that combined progressive bulk simple shear and pure shear modes enable to realistically reconstruct the kinematic history of the slip zone, through which particle movements and microstructural evolution were accomplished via various types of particulate flows. The results of this study show that clay mineralogy plays a more important role in the development of the slip zone than abundance of clay-size particles, while both clay mineralogy and relative proportions of each particle size fraction control the response of particles to shear deformation. Among the fractions present in the slip zone, fine silts are the strongest indicator of global shear stress characterized by their highest degree of alignment, whereas clay particles are the weakest. Highest degree of shape preferred orientation is also found within fine silt domains.