Abstract

The sensitivity and stability of sensing film material are mainly factors to impede the practical applications of ion-selective field effect transistor (ISFET) or electrolyte-insulator-semiconductor (EIS) pH sensors. Metal oxide films have demonstrated great advances on achieving high-performance pH sensors. However, some metal oxide films with low sensitivity and poor reliability still hinder the biochemical, environmental and medical applications. Therefore, choosing a proper sensing film material plays a very important role for the fabrication of highly sensitive and reliable sensors. In this article, the novel TbTaxOy sensing membrane demonstrating a super-Nernstian pH response and excellent stabililty was developed for a solid-state pH sensor. We investigated the relationship between sensing performance and microstructural property of the TbTaxOy sensing membranes deposited onto Si substrates through a reactive co-sputtering system and subsequently post-deposition annealing (PDA) at four temperatures (from 600°C to 900°C). To check the influence of PDA treatment on the microstructural properties of the TbTaxOy films, atomic force microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy were employed to manifest the morphological, microstructural, and chemical features, respectively, of these films. Among these PDA temperatures, the TbTaxOy EIS device after annealing at 900 °C exhibited the best sensing performances including, the super-Nernstian sensitivity (67.04 mV/pH), the lowest drift rate (0.12 mV/h), and the smallest hysteresis voltage (1 mV). Probably, this PDA temperature can enhance the surface roughness, form the stoichiometry of TbTaO4 film, and reduce the crystal defects. The super-Nernstian response may be contributed to a variation in the oxidation state of Tb ion changing from Tb3+ to Tb2+, thereby generating two H+ ions and one electron transferred in the chemical reaction. Moreover, this TbTaxOy sensing film demonstrates better sensing performance compared to previously fabricated sensing materials available in the literature.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call