Microstructural properties and hot pressing of rapidly solidified hypoeutectic low alloy white cast iron powders

Abstract

Hypoeutectic low alloy white cast iron powders were produced using a rapid solidification technique. The morphology and microstructural properties of these powders were investigated with respect to cooling rate and particle size. The density of hot pressed compacts as a function of parameters such as hot pressing time and pressure is described. It was found that retained austenite in the form of cells or dendrites was the main constituent of the powders. At 720°C the powder particles can be hot pressed into high density compacts that have a fine cementite–ferrite microstructure. These ultrafine grained compacts exhibited good superplasticity at elevated temperatures. An elongation to failure of 300% was observed.MST/1682