Abstract
ABSTRACTA novel short duration heat treatment schedule is proposed in the present investigation for the Al-17 wt-% Si-5 wt-% Cu alloy (AR alloy). The existing heat treatment uses long duration (4–24 h) holding at solutionising temperature prior to ageing treatment. In the present investigation, the AR alloy is subjected to isothermal holding at 590°C for 15 min followed by warm water quenching prior to the normal ageing schedule. Detailed microstructural investigations involving size and shape of primary as well as eutectic Si particles, porosity measurements along with hardness and tensile property characterisation are carried out to find the effect of isothermal heat treatment. The study reveals considerable improvement in microstructure and mechanical properties after this isothermal heat treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
