Abstract
The effects of Cr addition and tempering temperature on mechanical properties, especially sag resistance, with respect to the microstructural evolution during tempering in 1.5%Si spring steels, were investigated by performing hardness tests, tensile tests, torsional Bauschinger tests, and examination by transmission electron microscopy. The results obtained showed that the sag resistance depended on the distribution of tempered carbides. With increasing tempering temperature, sag resistance increased to a maximum value at 350°C and then decreased. The Cr addition did not affect the behaviour of tempered carbides at low tempering temperatures, while at high temperatures, above 400°C, the Cr addition reduced the coarsening rate of the cementite, resulting in finer particle distribution of the cementite. The Cr addition improved the sag resistance as well as the hardness at tempering temperatures above 400° C, but it decreased the ratio of loop area in the torsional Bauschinger test (the sag resistance) to hardness, regardless of tempering temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
