Abstract
Microstructural changes that occurred during the sintering of alumina doped with TiO 2 and SiO 2 have been investigated. The kinetics of normal grain growth at the initial stage is retarded by the dopant segregation at the grain boundaries. However, due to the accumulation of dopants at the grain boundaries during grain growth, its concentration at the boundaries ultimately exceeds the solubility limit and an intergranular liquid film emerges. The appearance of the liquid and the resulting increase in boundary mobility are confirmed to be the main cause of abnormal grain growth. For the abnormal grains, a liquid phase is observed at the basal surface in most cases, while the edges of these grains were partially wetted. Anisotropic or directional growth of the abnormal grains is explained in terms of the enhanced growth kinetics due to the re-entrant edges formed by grain boundaries at the non-basal planes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
