Abstract
A Mg–Li–Al–Zn alloy was friction stir processed (FSP) under water, and the microstructures and superplastic behavior in the FSP alloy were investigated. The FSP Mg–Li–Al–Zn alloy consisted of a mixed microstructure with fine, equiaxed, and recrystallized α (hcp) and β (bcc) grains surrounded by high-angle grain boundaries, and the average grain size of the α and β grains was ~1.6 and ~6.8 μm, respectively. The fine α grains played a critical role in providing thermal stability for the β grains. The FSP Mg–Li–Al–Zn alloy exhibited low-temperature superplasticity with a ductility of 330 % at 100 °C and high strain rate superplasticity with ductility of ≥400 % at 225–300 °C. Microstructural examination and superplastic data analysis revealed that the dominant deformation mechanism for the FSPed Mg–Li–Al–Zn alloy is grain boundary sliding, which is controlled by the grain boundary diffusion in the β phase.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.