Abstract
In this study, multicomponent AlCuSiZnFe high entropy alloy (HEA) was fabricated through high energy ball milling (HEBM) of constituent powders, and further densification via spark plasma sintering (SPS). The results show the presence of a predominant face-centered cubic (FCC) phase with a minor body-centered cubic (BCC) phase in (45 h) HEBMed powders which further develop according to the SPS treatment. At a low SPS temperature of 600 °C, the alloying of individual elements was poor. Further, at 650 °C, alloying improves and the liquid Cu–Zn FCC phase separates from the high-temperature Fe–Si-rich BCC phase during SPS. At 700 °C, Al was noticed to stabilize the BCC phase leaving behind soft FCC (Cu–Zn). Further increase in SPS temperature to 800 °C causes a complete melting of HEA compacts and the formation of Cu–Al intermetallic compounds (IMCs). The microhardness of the HEA compacts increases with SPS temperature in the range of 690–974 HV. The compressive properties were found to be optimum at 650 °C, compressive strength ≈1987 MPa and elastic modulus ≈27,945 MPa respectively. The measured densities of HEAs varied from 4.98 to 5.24 g/cm3, comparable to the heaviest of lightweight Ti alloys reported so far.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
