Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel

Abstract

NUCu-140 is a copper-precipitation-strengthened steel that exhibits excellent mechanical properties with a relatively simple chemical composition and processing schedule. As a result, NUCu-140 is a candidate material for use in many naval and structural applications. Before NUCu-140 can be implemented as a replacement for currently used materials, the weldability of this material must be determined under a wide range of welding conditions. This research represents an initial step toward understanding the microstructural and mechanical property evolution that occurs during fusion welding of NUCu-140. Microhardness traverses and tensile testing using digital image correlation show local softening in the heat-affected zone (HAZ). Microstructural characterization using light optical microscopy (LOM) revealed very few differences in the softened regions compared with the base metal. Local-electrode atom-probe (LEAP) tomography demonstrates that local softening occurs as a result of dissolution of the Cu-rich precipitates. MatCalc kinetic simulations (Vienna, Austria) were combined with welding heat-flow calculations to model the precipitate evolution within the HAZ. Reasonably good agreement was obtained between the measured and calculated precipitate radii, number density, and volume fraction of the Cu-rich precipitates in the weld. These results were used with a precipitate-strengthening model to understand strength variations within the HAZ.