Abstract
The subject of Mg-based biodegradable materials, used for medical applications, has been extensively studied throughout the years. It is a known fact that alloying Mg with biocompatible and non-toxic elements improves the biodegradability of the alloys that are being used in the field of surgical applications. The aim of this research is to investigate the aspects concerning the microstructure, electrochemical response (corrosion resistance) and in vitro cytocompatibility of a new experimental Mg-based biodegradable alloy—Mg–0.5%Ca with controlled addition of Gd as follows: 0.5, 1.0, 1.5, 2.0 and 3.0 wt.%—in order to establish improved biocompatibility with the human hard and soft tissues at a stable biodegradable rate. For this purpose, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), light microscopy (LM) and X-ray diffraction (XRD) were used for determining the microstructure and chemical composition of the studied alloy and the linear polarization resistance (LPR) method was used to calculate the corrosion rate for the biodegradability rate assessment. The cellular response was evaluated using the 3-(4,5-dimethyltiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) test followed by fluorescence microscopy observation. The research led to the discovery of a dendritic α-Mg solid solution, as well as a lamellar Mg2Ca and a Mg5Gd intermetallic compound. The in vivo tests revealed 73–80% viability of the cells registered at 3 days and between 77 and 100% for 5 days, a fact that leads us to believe that the experimental studied alloys do not have a cytotoxic character and are suitable for medical applications.
Highlights
Magnesium and its alloys are widespread in various fields such as human and veterinary medicine, and automotive and aerospace engineering, due to their superior properties in terms of biocompatibility, low modulus of elasticity, vibration damping and biodegradation capacity without side effects [1,2]
Medical applications that use biodegradable alloys based on Mg, Zn or Fe are widespread, especially for orthopedic and cardiovascular surgical applications, leading scientific research to confirm that these alloys are hierarchical in scale as opposed to their alloy successors such as stainless steel, Co–Cr alloys and Ti-based alloys [3]
Any kind of injury caused by the implantation of the biomaterial into the living tissue will initiate an inflammatory reaction to the material, with fibroblasts being a key contributor to new tissue formation post-injury, even though it may not necessarily be in direct contact with the implanted cardiovascular devices
Summary
Magnesium and its alloys are widespread in various fields such as human and veterinary medicine, and automotive and aerospace engineering, due to their superior properties in terms of biocompatibility, low modulus of elasticity, vibration damping and biodegradation capacity without side effects [1,2]. In addition to orthopedic applications in the form of pins, screws, rods and plates, Mg alloys have been investigated in cardiovascular applications as biodegradable Mg alloy stents [6,7,8,9,10,11] due to their biodegradability and mechanical properties. The ideal cardiovascular stent biomaterial should promote endothelialization with minimal neo-intimal hyperplasia In this sense, any kind of injury caused by the implantation of the biomaterial into the living tissue will initiate an inflammatory reaction to the material, with fibroblasts being a key contributor to new tissue formation post-injury (i.e., depositing new collagen and facilitating healing or fibrous encapsulation), even though it may not necessarily be in direct contact with the implanted cardiovascular devices. Wu et al [17] and Zhang et al [18] established that rare earth elements are divided into two classes: light RE elements (Y, Ce, La, etc.) and heavy RE elements (Gd, Sm, Sc, etc.) and research conducted by Liu et al identified that some of the most effective alloys used in the medical field are the Mg–Gd and Mg–Y binary alloys [19]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
