Abstract
Low cycle fatigue behavior of Sn-3.8Ag-0.7Cu solder was investigated under fully reversed cyclic loading, with particular emphasis on microstructural effects. The LCF behavior of the solder with equiaxed microstructure was found to differ greatly from that of the solder with a dendrite microstructure. At a given total strain amplitude, the dendrite microstructure exhibited a much longer fatigue life than the equiaxed microstructure. Such a strong microstructural effect on fatigue life arose from the difference in cyclic deformation and fracture mechanisms between the two microstructures. A large number of microcracks along grain boundaries of the equiaxed structure solder developed with increasing cycling, while for the dendrite structure solder, cyclic deformation took place along the direction of the maximal shear stress during fatigue tests and microcracks initiated and propagated along shear deformation bands. Besides, the fatigue behavior of the dendritic microstructure was very sensitive to cyclic frequency whereas the fatigue behavior of the equiaxed microstructure showed less sensitivity to cyclic frequency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
