Microstructural Development, Densification, and Hot Pressing of Celsian Ceramics from Ion‐Exchanged Zeolite Precursors

Abstract

Dense monoclinic celsian ceramics (melting point of 1760°C) have been fabricated utilizing zeolite precursors. A sodium zeolite (Na86Al86Si106O384H2O) was ion‐exchanged in aqueous solutions to replace Na with Ba ions. The ion‐exchanged powders were then heat‐treated to effect the collapse of the zeolite structure and formation of an amorphous phase at 627°C, followed by crystallization of the celsian ceramic at 990°C. Inducing viscous flow from a thermal soak above the glass transition temperature was necessary to form a dense body from cold‐pressed powders. Hot pressing at a pressure >5 MPa and above the crystallization temperature resulted in densities >90% of theoretical and eliminated the necessity of adding seed particles to form monoclinic celsian. To fabricate shaped bodies, the amorphous phase was molded at a temperature just above the glass transition temperature and then crystallized to monoclinic celsian at 1050°C. This processing technique demonstrates the potential of using zeolites as precursors for the low‐temperature fabrication of shaped refractory parts.