Abstract
Billets of an Al 7075-T651 alloy were processed by two passes of equal channel angular pressing, ECAP, by following route A. First pass was performed at 180°C and the second one in the temperatures 130 and 180°C. The resulting microstructures were characterized by optical microscopy, OM, and scanning electron microscopy, SEM. Also, material macroscopic mechanical properties were evaluated by performing uniaxial compression and Vickers microhardness tests. After the second pass, it was not verified a noticeable grain refinement. After second pass at 130oC, the samples presented higher mechanical strength than observed after their processing at 180°C and the second pass resulted in a decrease in the mechanical properties compared to the deformation by one pass at 180°C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.