Abstract
This paper presents the influence of adding rinsed ilmenite mud waste (R-MUD) on the microstructure of Portland cement composites, compared to similar composites containing fly ash (FA). The aim of the study is the assessment of the pozzolanic activity of ilmenite mud waste by its impact on the microstructure of the cement matrix in comparison to the undoubted pozzolanic activity of fly ash. The presented test results include pore size distribution, phase composition, pozzolanic activity using thermal analysis, R3 bound water test, and microstructural analysis using scanning electron microscopy (SEM). Tests were performed on mortars cured for up to 360 days. The results presented in this paper have shown that R-MUD has a pozzolanic activity level similar to FA or better, which influences pore size distribution in the composite and its microstructure. During the curing process, the microstructure of composites containing R-MUD became more compact and sealed than those with FA, which might also increase their durability. The results of the R3 tests have proven the pozzolanic activity of R-MUD but its level was lower than FA. R-MUD might be a useful substitute for fly ash, especially given the lack of good-quality fly ash on the market.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have