Abstract
Geopolymers made from simulated Martian regolith would suffer from exhibit poor engineering properties, rendering them unsuitable as base materials. To improve the mechanical properties of geopolymers, this study prepared a new Martian soil simulant named DH-1. DH-1- based geopolymers were synthesized using Al2O3 (Al group) and metakaolin (MK group) as modifying agents. The durability of geopolymers with ultraviolet (UV) radiation was assessed under simulated Martian atmospheric conditions. The results indicated that the UCS and FS of both the Al and MK groups increased with curing time, with maximum UCS and FS of 55.27 MPa and 15.16 MPa, respectively. The UCS and FS of the Al and MK groups exhibited a two-phase change. The inflection points for rapid to slow in the UCS and FS occurred on day 28 for the Al group and day 14 for the MK group. The addition of Al2O3 and metakaolin promoted the replacement of silicon atoms by aluminum atoms in the silica-oxygen group, producing more gels product. After UV irradiation, the UCS and FS of the geopolymer decreased by 13 % and 44 %, respectively. Furthermore, the geopolymers underwent carbonation, with new cracks forming due to the combined effects of UV exposure, causing strength reduction.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
