Abstract
AbstractThe electron beam welding of super duplex stainless steels is associated with challenges due to the concentrated heat input and the nitrogen loss that result in a predominantly ferritic structure after the solidification. This study presents an approach to overcome this issue by feeding nickel-based filler wire into the melt pool in welding of 2507 super duplex stainless steel. Results showed that the high-frequency beam oscillation combined with a multi-beam technique led a good mixing between the base metal and the filler wire, even at a large depth-to-width ratio. Additionally, the weld geometry was characterized by near-parallel fusion lines and a narrow heat-affected zone. The nickel addition resulted in a balanced microstructure in the weld metal with ferrite fractions of 35–55 %, despite a significant nitrogen loss, consequently leading to impact energy values of 215 ± 15 J and hardness values of 285 ± 15 HV. The findings of this investigation allow fabricators to effectively design electron beam welding processes for producing thick-walled super duplex stainless steel components.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
