Abstract
The effects of local microstructure on fracture properties in powder-metallurgy (P/M)-processed 2124/SiC/15w and 2009/SiC/15w composites are analyzed in this study. Ductility and fracture toughness of the 2009/SiC/15w, in which dispersoid-forming elements such as manganese and iron were nearly absent, were greater than in the 2124/SiC/15w, while its tensile and yield strengths were somewhat less. Microstructural examination and fracture parameter analysis revealed that the improved fracture toughness of the 2009/SiC/15w compared to the 2124/SiC/15w was due to the increase in the critical microstructural distance,l* when manganese-containing particles are absent. 2009/SiC/15w was also heat-treated in T4P and overaged (OA) conditions. The OA 2009 composite showed lower fracture toughness than the 2009-T4P composite and the critical fracture strain of the OA condition was much lower, too. Detailed fractographic analyses indicated that interface precipitates facilitate premature SiC whisker failure in the OA condition.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
