Micro-scratch behaviour of adsorbed film formed by aqueous copolymer lubricants with phosphate ester additive on Ti-coated surface

Abstract

PurposeThis paper aims to assess the adsorption behaviour and the adhesion strength of lubricant films formed by polypropylene oxide-polyethylene oxide-polypropylene oxide (PPO-PEO-PPO) with phosphate ester additive on Ti-coated surface and to identify the influence of molecular architecture and phosphate ester additive.Design/methodology/approachThe thickness of the adsorbed PPO-PEO-PPO with phosphate ester lubricant films on Ti surfaces was measured by ellipsometry. The adhesion strength of the copolymer and the copolymer with phosphate ester lubricants was studied by the micro-scratch tests; the scratch tracks on the surfaces were observed by atomic force microscopy and scanning electronic microscopy.FindingsThe copolymer with a higher weight percentage of PPO not only formed a thicker film but also showed stronger adhesion and better lubrication performance. The added phosphate ester increased the film thickness and improved the tribological behaviour. The finding reveals that the adsorbed film thickness which depends on the PPO chain length and the presence of phosphate ester has a considerable effect on the scratch behaviour.Originality/valueThis paper fulfils the studies about adsorption behaviour and lubrication mechanism of this new lubricant which has not been adequately investigated on the metal surface.