Abstract
Steel fibers, with their high stiffness and high ductility, have a potential to provide a new range of properties in polymer composites, in comparison with carbon and glass fiber composites. However, the high stiffness contrast between the steel fiber and the polymer matrix plus the fiber’s non-circular cross-section are likely to generate high stress concentrations in a composite under transverse loading. In the present study, these stress concentrations are analyzed using finite element modeling and compared with the case of carbon and glass fiber composites. The study is performed for an isolated fiber and multiple fibers in hexagonal and random packings with 40% and 60% of fiber volume fractions. According to the results, in spite of a high contrast between the stiffness values of steel and glass fibers, no significant difference between the transverse stress concentrations was observed for steel and glass fibers in the hexagonal packing due to the difference in material properties. Differences in stress concentrations were noted for the case of randomly packed fibers. The polygonal cross-section of steel fibers was found to introduce extreme stress concentrations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.