Microscale Corrosion Inhibition Behavior of Four Corrosion Inhibitors (BTA, MBI, MBT, and MBO) on Archeological Silver Artifacts Based on Scanning Electrochemical Cell Microscopy.

Abstract

The problem of corrosion-induced discoloration and embrittlement in silverware is a significant concern for the long-term preservation of excavated archeological silver artifacts, even after thermal restoration. The key to addressing this issue lies in the meticulous selection and evaluation of corrosion inhibitors that possess targeted corrosion inhibition capabilities. This study focuses on the evaluation of corrosion inhibitors for archeological silver artifacts using scanning electrochemical cell microscopy (SECCM) and X-ray photoelectron spectroscopy (XPS). The researchers aimed to compare the inhibition effects of four corrosion inhibitors [1,2,3-benzotriazole (BTA), 2-mercaptobenzimidazole (MBI), 2-mercaptobenzothiazole (MBT), and 2-mercaptobenzoxazole (MBO)] on a simulated Ag-Cu alloy sample and understand their mechanisms. The results showed that MBT exhibited better corrosion inhibition for microstructural regions with higher silver content due to its ability to form stable chelation structures with Ag(I). MBO exhibited better corrosion inhibition for microstructural regions with higher copper content due to its strong affinity with Cu(I). The targeted corrosion inhibition ability for the β-phase was ranked as MBO > BTA ≈ MBI > MBT, while for the α-phase the ranking was MBT > MBO > MBI > BTA. The study demonstrated the feasibility and capabilities of SECCM in the targeted screening of corrosion inhibitors for different compositions and microstructural regions in archeological metal artifacts. This study highlights the potential of SECCM in corrosion inhibitor research for archeological metal artifacts and wider applications in metal material corrosion protection.