Abstract
Graphene nanoplatelets (GNPS) was prepared by oxidation coupled mechanical delamination method. Epoxy based composites were prepared with GNPS, carbon black (CB) and graphite nanopowders (nanoG). The dispersion of different carbon materials was investigated by scanning electron microscope (SEM), which showed the better compatibility of GNPS in epoxy matrix. The results of dynamic mechanical thermal analysis (DMTA) showed the lower glass transition temperature (Tg) of GNPS/epoxy composite, indicating the influence of GNPS on the curing of epoxy resin. The higher storage modulus of GNPS/epoxy composite was the evidence of its better compatibility. The dielectric behaviors of the composites were studied in a wide frequency range. The GNPS/epoxy composite showed high dielectric permittivity and loss at low frequency due to its interfacial polarization. The composites with 1.0 wt.% GNPS presented much higher dielectric permittivity at high frequency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
