Micrometer-sized mesoporous diamond spherical particles

Abstract

Micrometer-sized porous diamond spherical particles (PDSPs) were fabricated from nanodiamond (ND) particles using spray drying and microwave plasma-assisted chemical vapor deposition (MPCVD). Nitrogen gas sorption measurement revealed that the PDSP fabricated from 5 nm detonation ND particles had a Brunauer–Emmett–Teller (BET) surface area of ca. 300 m 2 g − 1 and a narrow pore diameter distribution around 10 nm. Nitrogen sorption analysis of PDSP fabricated from various ND particle sizes (diameters from 20 to 50 nm) showed that the BET surface area decreased (200–85 m 2 g − 1 ) and the average pore diameter increased (4.6–9.3 nm) as the ND diameter increased from 20 to 50 nm. Calculation with a simple model revealed that the pores of the PDSP were derived from the interparticle space of the NDs. The PDSP was durable to immersion in aqueous solutions of HF and NaOH, which indicates the extremely high chemical stability of the diamond-based mesoporous material. The PDSP surface was modified with octadecyl groups using a photochemical method. A column packed with the modified PDSP was successfully employed in a reverse phase high performance liquid chromatography (HPLC) column, and the successful separation of organic compounds was demonstrated with a water/acetonitrile mixture mobile phase. • Micrometer-sized mesoporous diamond spherical particles were fabricated. • Pore size can be controlled by nanodiamond particle size used. • The porous diamond spherical particle (PDSP) exhibited extreme chemical stability. • The modified PDSP was applied to HPLC column packing material.