Abstract
This study presents a series of monotonic drained triaxial tests consisting of mixtures of sand (stiff) and rubber (soft) particles simulated by the discrete element method (DEM). Sets of mixtures were prepared with different rubber size ratio of 1, 2.5 and 5 and contents ranging from 0% to 30% by weight. The numerical samples were sheared up to large axial strains to reach a critical state. The slope of the critical state lines is strongly affected when the rubber size is the same as sand. When rubber size increases, the critical state lines shift downward with little effect on the slope. While it is generally accepted that, for the given range of rubber contents used in the study, the sand-rubber mixture strength increases when adding rubber particles, the results from this study suggest that said strength diminishes as rubber size is incremented. Micro-scale information, including coordination number, geometrical and mechanical anisotropy, was obtained for all the tests. Regardless of the rubber particle size, rubber-sand contacts represent an important contribution to the overall strength of the material; however, the rubber particle size dictates how said contribution takes place. These findings highlight the importance of understanding new geomaterials to practicing engineers that different size ratios and rubber contents have positive or negative effect of strength and deformability and the choice of a sand-rubber mixture has to be based on the project nature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.