Micromachined electrochemical T-switches for cell sorting applications

Abstract

MEMS micro-T-switches actuated via electrochemical bubbles for cell sorting applications in a monolithic chip level are proposed and successfully demonstrated. The electrolysis-bubble actuator, which has the features of low operation temperature and high surface-tension force, is developed to actuate the micro-T-switch sorting structure in our device. The double T-structure design, the T-shape microchannel with the movable micro-T-switch structure located at the junction of the T-shape microchannel, with the electrolysis-bubble actuator makes an active-binary switch function available for cell sorting applications. The room temperature operation and the low voltage required for electrolysis actuation minimize the possibility of cell-damage that happens in the conventional high electric separation instruments, such as flow cytometry. The function of our micro-T-switch chip with a low required actuation voltage of 3.0 approximately 3.5 V is demonstrated by using human hepatoma cells in this paper. The pH-value measurements characterize the pH-value variation and distribution in the actuating chambers and the mainstream microchannels to trace the possible liver-cell injury due to the pH-value variation during electrolysis-actuation operation. The 84.1% cell viability in the sorted human hepatoma cells through our micro-T-switch sorter is observed via the fluorescence assay technique. Furthermore, 70.2% of total injected cells recover in culture after sorting and grow into colonies after micro-T-switch sorting operation. In this paper, we describe the design, microfabrication, and characterization of our micro-T-switch cell-sorting chip. We also report the cell-sorting demonstration and the cell viability results for the mammalian liver cells through our micro-T-switch cell-sorting chip.