Abstract
Introduction. Microacoustic sensors based on surface acoustic wave (SAW) devices allow the sensor integration into a wafer based microfluidic analytical platforms such as lab-on-a-chip. Currently exist various approaches of application of SAW devices for liquid properties analysis. But this sensors probe only a thin interfacial liquid layer. The motivation to develop the new SAW-based sensor is to overcome this limitation. The new sensor introduced here uses acoustic measurements, including surface acoustic waves (SAW) and acoustic methamaterial sensor approaches. The new sensor can become the starting point of a new class of microsensor. It measures volumetric properties of liquid analytes in a cavity, not interfacial properties to some artificial sensor surface as the majority of classical chemical and biochemical sensors.Objective. The purpose of the work is to find solutions to overcome SAW-based liquid sensors limitations and the developing of a new sensor that uses acoustic measurements and includes a SAW device and acoustic metamaterial.Materials and methods. A theoretical analysis of sensor structure was carried out on the basis of numerical simulation using COMSOL Multiphysics software. Lithium niobate (LiNbO3) 127.86° Y-cut with wave propagation in the X direction was chosen as a substrate material. Microfluidic structure was designed as a set of rectangular shape channels. A method for measuring volumetric properties of liquids, based on SAW based fluid sensor concept, comprising the steps of: (a) providing sensor structure with the key elements: a SAW resonator, a high-Q set of liquid-filled cavities and intermediate layer with artificial elastic properties between them; (b) measuring of resonance frequency shift, associated with the resonance in liquid-filled cavity, in the response of weakly coupled resonators of SAW resonator loaded by periodic microfluidic structure; (c) determination of volumetric properties of the fluid on the basis of a certain relationship between the speed of sound in liquid, the resonant frequency of the set of liquid-filled cavities, and the geometry design of the cavity.Results. The new sensor approach is introduced. The eigenmodes of the sensor structure with a liquid analyte are carried out. The characteristic of sensor structure is determined. The key elements of introduced microfluidic sensor are a SAW structure, an acoustic metamaterial with a periodic set of microfluidic channels. The SAW device acts as electromechanical transducer. It excites surface waves propagating in the X direction lengthwise the periodic structure and detects the acoustic load generated by the microfluidic structure resonator. The origin of the sensor signal is a small frequency change caused by small variations of acoustic properties of the analyte within the set of microfluidic channels.Conclusion. The principle of the new microacoustic sensor, which can become the basis for creating a new class of microfluidic sensors, is shown.
Highlights
Microacoustic sensors based on surface acoustic wave (SAW) devices allow the sensor integration into a wafer based microfluidic analytical platforms such as lab-on-a-chip
A method for measuring volumetric properties of liquids, based on SAW based fluid sensor concept, comprising the steps of: (a) providing sensor structure with the key elements: a SAW resonator, a high-Q set of liquid-filled cavities and intermediate layer with artificial elastic properties between them; (b) measuring of resonance frequency shift, associated with the resonance in liquid-filled cavity, in the response of weakly coupled resonators of SAW resonator loaded by periodic microfluidic structure; (c) determination of volumetric properties of the fluid on the basis of a certain relationship between the speed of sound in liquid, the resonant frequency of the set of liquid-filled cavities, and the geometry design of the cavity
The principle of the new microacoustic sensor, which can become the basis for creating a new class of microfluidic sensors, is shown
Summary
Microacoustic sensors based on surface acoustic wave (SAW) devices allow the sensor integration into a wafer based microfluidic analytical platforms such as lab-on-a-chip. The SAW device acts as electromechanical transducer It excites surface waves propagating in the X direction lengthwise the periodic structure and detects the acoustic load generated by the microfluidic structure resonator. The SAW sensor based on 36 ̊ YX cut of LiTaO3 wafer was utilized as a biosensor to detect amounts of an enzyme immobilized on a surface during the catalytic reaction [9] Later, another type of shear horizontal SAW liquid sensor was developed with the use of Love surface wave. This type of wave appears in a layered structure and localizes in the overlayer because of its low acoustic wave velocity in comparison to the waveguide Such acoustic wave localization allows decreasing the surface wave attenuation caused by scattering into the bulk of the substrate. The adjustment of the waveguiding layer thickness may create an acoustic film resonance that significantly improves the sensor sensitivity to mass loading [10]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of the Russian Universities. Radioelectronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.