Abstract
Micromachining arbitrary 3D silicon structures for micro-electromechanical systems can be accomplished using gray-scale lithography along with dry anisotropic etching. In this study, we have investigated the use of deep reactive ion etching (DRIE) and the tailoring of etch selectivity for precise fabrication. Silicon loading, the introduction of an O 2 step, wafer electrode power, and wafer temperature are evaluated and determined to be effective for coarsely controlling etch selectivity in DRIE. The non-uniformity and surface roughness characteristics are evaluated and found to be scaled by the etch selectivity when the 3D profile is transferred into the silicon. A micro-compressor is demonstrated using gray-scale lithography and DRIE showing that etch selectivity can be successfully tailored for a specific application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have