Abstract
This study evaluated the influence of wall material concentration (10–30%), inlet temperature (135–195°C), and feed rate (0.5–1.0 L · h−1) on the properties of rosemary oil microencapsulated by spray-drying, with gum arabic as carrier. Powder recovery, surface oil, oil retention, and hygroscopicity varied from 17.25%–33.96%, 0.03%–0.15%, 7.15%–47.57%, and 15.87%–18.90%, respectively. The optimized conditions were determined to be a wall material concentration of 19.3%, an inlet air temperature of 171°C, and a feed flow rate of 0.92 L · h−1. At this condition, particles presented no fissures and the compositions of pure and microencapsulated oil were similar. The sorption isotherms could be described by the GAB model.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.