Microchromatography integrated with impedance sensor for bioprocess optimization: Experimental and numerical study of column efficiency for evaluation of scalability

Abstract

In the last decade, there has been a growing interest in developing microfluidic systems as new scale-down models for accelerated and cost-effective biopharmaceutical process development. Nonetheless, the research in this field is still in its infancy and requires further investigation to simplify and accelerate the microfabrication process. In addition, integration of different label-free sensors into the microcolumn systems has utmost importance to minimize result discrepancies during the scale-up process.In this study, we developed a simple, low-cost integrated microcolumn (26 µl). Micromilling technology was employed to define the geometry and shape of microfluidic structures using poly(methylmethacrylate) (PMMA). The design of PMMA microstructure was transferred to polydimethylsiloxane (PDMS), and interdigitated planar microelectrodes (IDE) were integrated into the system. To evaluate the scalability of the developed microcolumn column, column performance was assessed and compared with a conventional 1-ml prepacked column. Computational Fluid Dynamics (CFD) studies were performed for both columns to understand the differences between theoretical and experimental results regarding retention time and peak broadening. Despite obtaining an acceptable asymmetric factor for the microcolumn (1.03 ± 0.02), the reduced plate height value was still higher than the recommended range with the value of 4.14 ± 0.18. Nevertheless, the consistency and significant improvement of microcolumn efficiency compared to previous studies provide the possibility of developing robust simulation tools for transferring acquired experimental data for larger-scale units.