Abstract
This study highlights the role of marine microbial biosurfactants on solubilization/removal of crude-oil contamination from four different soils in an aqueous phase. Soil of four different types, viz., sandy, fine sand soil, clay, and clay loam, were collected and saturated with crude oil. Marine isolate MTCC 5514 (Bacillus licheniformis) was chosen for the study and comparisons were made with synthetic surfactants and commercially available biosurfactant. In-situ studies were carried out with different percentages of crude oil to assess the growth and the percentage removal of oil. For ex-situ studies, soils were pre-saturated with crude oil and then treated with the chosen biosurfactant at a 10% concentration level using flask and column methods. After time intervals of 30–120 min, samples were collected and then subjected to extraction with hexane and the percentage removal was calculated. Results revealed, at 2% concentration of crude oil, that complete solubilization was achieved. With regard to ex-situ studies, clay soil absorbed the maximum percentage of oil compared to other soil types, and with regard to the removal, all the synthetic surfactants showed <60% removal irrespective of soil type. In the case of biosurfactants even at 10% concentration, >85% removal was achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Biodeterioration & Biodegradation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.