MgO nanofluids: higher thermal conductivity and lower viscosity among ethylene glycol-based nanofluids containing oxide nanoparticles

Abstract

Five kinds of oxides, including MgO, TiO2, ZnO, Al2O3 and SiO2 nanoparticles were selected as additives and ethylene glycol (EG) was used as base fluid to prepare stable nanofluids. Thermal transport property investigation demonstrated substantial increments in the thermal conductivity and viscosity of all these nanofluids with oxide nanoparticle addition in EG. Among all the studied nanofluids, MgO–EG nanofluid was found to have superior features, with the highest thermal conductivity and lowest viscosity. The thermal conductivity enhancement ratio of MgO–EG nanofluid increases nonlinearly with the volume fraction of nanoparticles. In the experimental temperature range of 10–60°C, thermal conductivity enhancement ratio of MgO–EG nanofluids appears to have a weak dependence on the temperature. Viscosity measurements showed that MgO–EG nanofluids demonstrated Newtonian rheological behaviour, and the viscosity significantly decreases with the temperature. The thermal conductivity and viscosity increments of the nanofluids are much higher than the corresponding values predicted by the existing classical models for the solid–liquid mixture.