Methylated Biochemical Fulvic Acid-Derived Hydrogels with Improved Swelling Behavior and Water Retention Capacity.

Abstract

Although humic acids (HAs) have been used to prepare absorbent hydrogels, their applications in many areas, such as agriculture, wastewater treatment and hygienic products, are not satisfactory due to their low solubility in organic solvents. In this work, biochemical fulvic acid (BFA), as a kind of HA, was initially methylated for preparation of the methylated BFA (M-BFA), which contributed to enhancing the solubility in organic solvents. Then, M-BFA reacted with N,N'-methylene diacrylamide (MBA) in the N,N-Dimethylacrylamide (DMAA) solution, and the expected hydrogel (M-BFA/DMAA) was successfully obtained. XPS confirmed that there were more C=O and C-N groups in M-BFA/DMAA than in DMAA; thus, M-BFA/DMAA was able to offer more reactive sites for the water adsorption process than DMAA. The combined results of BET and SEM further demonstrated that M-BFA/DMAA possessed a larger BET surface area, a larger pore volume and a more porous structure, which were favorable for the transfer of water and accessibility of water to active sites, facilitating water adsorption and storage. In addition, the swelling ratio and water retention were investigated in deionized (DI) water at different conditions, including test times, temperatures and pHs. Amazingly, the swelling ratio of M-BFA/DMAA was 10% higher than that of DMAA with the water retention time from 100 to 1500 min. Although M-BFA/DMAA and DMAA had similar temperature sensitivities, the pH sensitivity of M-BFA/DMAA was 0.9 higher than that of DMAA. The results proved that M-BFA/DMAA delivered superior water retention when compared to the pristine DMAA. Therefore, the resultant materials are expected to be efficient absorbent materials that can be widely used in water-deficient regions.