Methods for calculating aerodynamics inside high-speed railway tunnel lining cracks and predicating stress intensity factors

Abstract

PurposeThis study aims to propose a series of numerical and surrogate models to investigate the aerodynamic pressure inside cracks in high-speed railway tunnel linings and to predict the stress intensity factors (SIFs) at the crack tip.Design/methodology/approachA computational fluid dynamics (CFD) model is used to calculate the aerodynamic pressure exerted on two cracked surfaces. The simulation uses the viscous unsteady κ-ε turbulence model. Using this CFD model, the spatial and temporal distribution of aerodynamic pressure inside longitudinal, oblique and circumferential cracks are analyzed. The mechanism behind the pressure variation in tunnel lining cracks is revealed by the air density field. Furthermore, a response surface model (RSM) is proposed to predict the maximum SIF at the crack tip of circumferential cracks and analyze its influential parameters.FindingsThe initial compression wave amplifies and oscillates in cracks in tunnel linings, resulting from an increase in air density at the crack front. The maximum pressure in the circumferential crack is 2.27 and 1.76 times higher than that in the longitudinal and oblique cracks, respectively. The RSM accurately predicts the SIF at the crack tip of circumferential cracks. The SIF at the crack tip is most affected by variations in train velocities, followed by the depth and length of the cracks.Originality/valueThe mechanism behind the variation of aerodynamic pressure in tunnel lining cracks is revealed. In addition, a reliable surrogate model is proposed to predict the mechanical response of the crack tip under aerodynamic pressures.