Methods for adhesion/friction reduction of novel wire-shaped actuators, based on shape memory alloys, for use in adaptive fiber-reinforced plastic composites

Abstract

For fiber-reinforced plastic composites, fiber-matrix adhesion is a significant aspect of composite properties. While conventional lightweight structures are always aiming for high fiber-matrix adhesion, innovative and unconventional functional constructions require different concepts. The research work treating adaptive fiber-reinforced plastic composites with shape memory alloy wires presented here uses the approach of actuators freely movable within the composite. This is supposed to prevent mechanical tensions in the interfaces of actuator and composite structure, which would otherwise cause damages of the composite. This work examines hybrid yarns based on friction spinning technology, with shape memory alloy wires as their core component as well as glass fibers, and partly polypropylene, as their sheath component. Additionally, the surface properties of the shape memory alloy wires being used are modified by sanding and coating. The results of a characterization by pull-out testing clearly show that a coating of the shape memory alloy wires with an abherent causes considerable decrease in adhesion and friction in the interface and leads to the mobility of the shape memory alloy wires in the later composite. An even greater effect is attained by sheathing the hybrid yarns in an additional layer of polypropylene, compacting the yarn cross-section. Thus, the pull-out force could be reduced to 35–40% of the reference structure.