Abstract
Offshore structures designed for operation in regions where sea ice is present will include a sea ice load component in their environmental loading assessment. Typically ice loads of interest are for 10−2, 10−3 or 10−4 annual probability of exceedance (APE) levels, with appropriate factoring to the required safety level. The ISO 19906 standard recommends methods to determine global sea ice loads on vertical structures, where crushing is the predominant failure mode. Fitted coefficients are proposed for both Arctic and Sub-Arctic (e.g. Baltic) conditions. With the extreme ice thickness expected at the site of interest, an annual global sea ice load can be derived deterministically. Although the simplicity of the proposed relation provides quick design load estimates, it lacks accuracy because the only dependencies are structure width, ice thickness and provided coefficients; no consideration is given to site-specific sea ice conditions and the corresponding exposure. Additionally, no term is provided for including ice management in the design load basis. This paper presents a probabilistic methodology to modify the deterministic ISO 19906 relations for determining global and local first-year sea ice loads on vertical structures. The presented methodology is based on the same ice pressure data as presented in ISO 19906, but accounts better for the influence of ice exposure, ice management and site-specific sea ice data. This is especially beneficial for ice load analyses of seasonal operations where exposure to sea ice is limited, and only thinner ice is encountered. Sea ice chart data can provide site-specific model inputs such as ice thickness estimates and partial concentrations, from which corresponding global load exceedance curves are generated. Example scenarios show dependencies of design loads on season length, structural geometry and sea ice conditions. Example results are also provided, showing dependency of design loads on the number of operation days after freeze-up, providing useful information for extending the drilling season of MODUs after freeze-up occurs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.