Methodology and model for performance and cost comparison of innovative treatment technologies at wood preserving sites

Abstract

AbstractWood preserving facilities have used a variety of compounds, including pentachlorophenol (PCP), creosote, and certain metals, to extend the useful life of wood products. Past operations and waste management practices resulted in soil and water contamination at a portion of the more than 700 wood preserving sites in the United States (EPA, 1997). Many of these sites are currently being addressed under federal, state, or voluntary cleanup programs. The U.S. Environmental Protection Agency (EPA) National Risk Management Research Laboratory (NRMRL) has responded to the need for information aimed at facilitating remediation of wood preserving sites by conducting treatability studies, issuing guidance, and preparing reports. This article presents a practical methodology and computer model for screening the performances and comparing the costs of seven innovative technologies that could be used for the treatment of contaminated soils at user‐specified wood preserving sites. The model incorporates a technology screening function and a cost‐estimating function developed from literature searches and vendor information solicited for this study. This article also provides background information on the derivation of various assumptions and default values used in the model, common contaminants at wood preserving sites, and recent trends in the cleanup of such sites. © 2001 John Wiley & Sons, Inc.