Methodical selection of thermal conductivity models for porous silica-based media with variation of gas type and pressure

Abstract

If the effective thermal conductivity of a silica powder in any gas atmosphere is to be calculated analytically, one is faced with a whole series of decisions. There are a lot of different models for the gas thermal conductivity in the pores, the thermal accommodation coefficient or the effective thermal conductivity itself in the literature. Furthermore, it has to be decided which input parameters should be used. This paper gives an overview and recommendations as to which calculation methods are best suited for the material classes of precipitated silica, fumed silica, silica gel and glass spheres. All combinations of the described methods result in a total of 2800 calculation models which are compared with pressure-dependent thermal conductivity measurements of 15 powdery materials with 7 different gases using Matlab computations. The results show that with a model based on a spherical unit cell, which considers local Knudsen numbers, the measuring points of all powder-gas combinations can be determined best with an average variance of about 18.5%. If the material class is known beforehand, the result can be predicted with an average accuracy of about 10% with the correspondingly determined methods.