Abstract

The routine determination of mercury (Hg) by inductively coupled plasma mass spectrometry (ICP-MS) is affected by a pronounced memory effect in the sample introduction system. This results in long washout times for the analyte, which affects the accuracy and reliability of the analytical procedure. By using a combination of flow injection sample introduction and a sulfur-containing compound in the carrier solution, it was possible to decrease the memory effect of mercury to that for the internal standard (rhodium). The carrier solution contained 2-mercaptoethanol (2-ME) and the developed method was evaluated using three different fish tissue certified reference materials: CRM 464 (BCR, Brussels); DORM-1; and DORM-2 (NRC, Canada). The samples were mineralized using a combination of concentrated nitric acid and hydrogen peroxide and heating in a closed microwave oven. The developed flow injection ICP-MS procedure gave values for total mercury in all three CRM materials in agreement with the certified concentration range. Cold vapour atomic fluorescence spectrometry (CV-AFS) confirmed the results from the developed method. The developed flow injection method had a detection limit (defined as three times the standard deviation of the blank concentration) for mercury of 5.1 μg l −1.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.