Method of ballistic control and projectile rotation in a novel railgun

Abstract

Abstract In order to realize the ballistic control of the railgun and the flight stability of the projectile, a new type of railgun is designed, which can control the muzzle velocity and rotation rate. The method of the muzzle velocity and overload control is to adjust the voltage or other parameters of pulse power supply. It would be easy to change velocity accurately in large wide. Another widespread concern problem is launching the spinning stability projectile by railgun. This paper designed a new structure of additional rails to generate an unsymmetrical magnetic field to produce rotational torque in armature. The structure is simple and can control the rotation rate by linear changing the barrel parameters. The calculation formulas of interior ballistic are derived by Biot-Safar law. The important parameter is the deflection angle of the additional rails relative to the symmetry plane of main rail. The larger the angle, the greater the rotation torque generated in the armature. To maintain the flight stability of the projectile, the barrel structural parameters should be proportional to the projectile structural parameters. When changing the muzzle velocity, the rotation rate will also be the equal proportion change. So that the gyro stability is the same. The experiment proves that the railgun designed in this paper can launch the projectile to rotate. And the rotational projectile may not cause the transition or much arcs. This method expands the application of the railgun.