Abstract
In this study, a method for establishing a prediction model for the liquid-sloshing characteristics of microsatellite propulsion systems is proposed. The ideal states of the liquid-sloshing characteristics are considered for the following three models: (1) storage tank, (2) coupled storage tank and microsatellite, and (3) coupled storage tank and microsatellite with a deployment mechanism. The smoothed-particle hydrodynamics method is implemented in ABAQUS to study the effect of sloshing on a storage tank and microsatellite disturbance for the above three cases. Relationship models between the sloshing time, sloshing angular velocity, amount of fluid filled, and satellite attitude angular velocity are established. The analysis results show that the disturbance angular velocity of the empty storage tank and sloshing angular velocity have a linear relationship. Furthermore, the disturbance angular velocity of the liquid-filled storage tank exhibits a surface relationship with the sloshing angular velocity and amount of fluid filled in a three-dimensional coordinate system. Additionally, the disturbance angular velocity in the liquid-filled state of the storage tank is higher than that of the empty storage tank, and the degree of disturbance decreases with the increase in the mass of the coupling. The disturbance of the storage tank and microsatellite with the deployment mechanism is 10−2°/s when the angular velocities of the satellite areωx′=3,ωy′=3, andωz′=2. The maximum and minimum deviations between the calculation and simulation results of the three models are 7.6% and 1.1%, respectively. The model is used to predict the disturbance angular velocity of the microsatellite. When the calculation results of the model are compared with the orbit satellite data, the maximum and minimum disturbance angular velocity deviations occur in theyandzdirections with a deviation of 43.36% and 14.86%, respectively. This demonstrates the accuracy of the analysis and model. The results of this study can provide theoretical guidance for the engineering design and attitude and orbital control of a microsatellite propulsion system.
Highlights
The continuous improvement of modern technology has led to several important developments such as microelectronics, microcomputers, and new material development
Ni et al [4] and Liu and Chang [5] studied the smoothed-particle hydrodynamics (SPH) method, and the findings showed that regular, uniform particle distributions yield more accurate results and increased the stability of the numerical calculations
The results demonstrated that the Hamiltonian–Casimir technique was effective for studying the spacecraft attitude dynamics, aerodynamics, and other fluid-carrying moving bodies that could be affected by liquid sloshing
Summary
The continuous improvement of modern technology has led to several important developments such as microelectronics, microcomputers, and new material development. Research in the field of space pertaining to modern microsatellites is rapidly expanding owing to several attractive features, including their low weight, small size, low cost, high performance, and short development period. Satellite formations or constellations consist of several small satellites, and each satellite requires precise control of its orbit phase and attitude. Because microsatellites are being used for increasingly difficult tasks, their pointing accuracy and precision have improved at a rapid rate. The demand for in-orbit propulsion technology of microsatellites has heightened along with that for miniaturized propulsion systems. The propulsion systems of microsatellites have the characteristics of high-volume utilization, high efficiency, adept control, and less environmental pollution.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
