Abstract

The primary goal of this research was to determine the potential for denitrification and phosphorus removal of a full-scale sequencing batch reactor (SBR), with and without the use of methanol as an external carbon source. The control SBR, without methanol addition, achieved negligible denitrification. Two denitrification rates were observed in the experimental SBR, with methanol addition; an initial fast rate and a slower second rate. The denitrification rate during the first rate period increased with increasing methanol concentration, until a maximum denitrification rate of ∼19 mg NO x -N/g MLVSS/day was attained. Following the depletion of the methanol, denitrification reactions probably continued by using the available natural carbon in the influent, resulting in a slower, second denitrification rate. Biological phosphorus uptake and release was significant only in the SBR with methanol addition. Methanol was probably not utilized as the carbon source for the enhanced biological phosphorus removal (EBPR) process. However, methanol addition was critical, since it depleted the available nitrates and thus allowed EBPR to take place.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.