Abstract
AbstractProton exchange membranes for a direct methanol fuel cell were prepared by blending poly(vinylidene fluoride) [PVDF] with sulfonated poly(etheretherketone) [SPEEK]. The effects of PVDF content on methanol permeability in the blend membranes were investigated by using a diffusion cell and gas chromatography technique. The thermal resistance and proton conductivity of the membranes were also determined by using a thermal gravimetric analysis (TGA) and an impedance analysis technique, respectively. It was found that methanol permeability in the blend membranes decreased with PVDF content at the expense of proton conductivity. The methanol permeability values of the blend membranes are much lower than that of Nafion 115, whereas proton conductivities of the membranes are comparable to that of Nafion. The thermal stability of these blend membranes are above 250°C which is sufficiently high for use in DMFC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5941–5947, 2006
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
