Methanol, ethanol, propanol, butanol and glycerol as hydrogen carriers for direct utilization in molten carbonate fuel cells

Abstract

This paper reports the performance of a molten carbonate fuel cell (MCFC) fed directly with liquid fuels referenced against results with hydrogen fuel in experiments conducted by the research team. Alcohols have greater energy density than pure hydrogen in normal conditions and, if presented as biofuels, the MCFC can be deemed a renewable energy source. For evaluation purposes various alcohols occurring in standard conditions in the liquid state were used for electricity generation in the MCFC: methanol, ethanol, propanol, butanol and glycerol. Since these alcohols can be subjected to steam reforming when mixed with water in specific ratios, they can be delivered directly in the liquid state to the fuel cell, where hydrogen is released and used to produce electricity and heat. The alcohols were mixed with water in ratios of 1:2, 1:3, 1:4. The results were compared to the MCFC fed with pure hydrogen as a fuel. In terms of power referenced to hydrogen (100%), the maximums achieved were 78% for butanol, 80% for glycerol, 83% for propanol, 86% for ethanol and 93% for methanol in comparison to the same amount of hydrogen delivered to the fuel cell in ideal steam reforming situation. Threats such as carbon deposition on the fuel cell surface were also evaluated.