Methane hydrate formation in thick sand reservoirs: 1. Short-range methane diffusion

Abstract

We show with a comprehensive hydrate formation model that diffusion of dissolved methane along the local concentration gradient alone cannot transport enough methane to form the concentrated methane hydrates in thick (>= several m) marine sand reservoirs. In this model, methane is generated locally by biodegradation of organic matter in mudstones and diffused into the bounding sandstone where the methane hydrate solubility decreases abruptly and hydrate precipitates from the extra methane in water. Hydrate formed by local diffusion has peak concentrations at the top and base of the sandstone, and it decreases sharply toward the center; salinity is slightly elevated relative to seawater, and its gradient is negligible across the sandstone and adjacent mudstones; dissolved methane concentration decreases from the mudstones to the sandstone. Overpressure is generated in the sediment due to reduction of sediment permeability and volume expansion when hydrate replaces pore water. There is a shallow zone where pore pressure converges toward the lithostatic pressure and fracturing is possible. This study provides further insights into hydrate formation by local diffusion of dissolved methane. In addition, the numerical model we developed in this study fully couples the hydrate-liquid capillary effect, dynamic pore size change, and transient pore pressure-dependent sediment compaction with the multiphase (gas, liquid and hydrate) flow and multicomponent (methane, water and salt) transport. Our model not only predicts pore pressure, but also incorporates the effect of hydrate formation on overpressure generation and subsequent dissipation. These modeling approaches are now at a level of sophistication that we can start to distinguish what physical processes, of the several proposed, are viable explanations for observed hydrate deposits.