Abstract
Ti-5Ta-2Nb alloy was clad on 304L austenitic stainless steel (SS) using the explosive cladding process. Both Ti-5Ta-2Nb and 304L austenitic steel were severely deformed due to high pressure (in the gigapascal range) and strain rate (105/s), which are characteristics of explosive loading conditions. Consequent changes produced in the microstructure and crystal structure of both the alloys are studied using electron microscopy techniques. The microstructure of both Ti-Ta-Nb alloy and 304L steel showed evidence for the passage of the shock waves in the form of a high number density of lattice defects such as dislocations and deformation twins. In addition, both the alloys showed signatures of phase transformation under nonequilibrium conditions resulting in metastable transformation products. 304L SS showed martensitic transformation to both α′(bcc) and e(hcp) phases. Microscopic shear bands, shear band intersections, and twin boundaries were identified as nucleation sites for the formation of strain-induced phases. Ti-Ta-Nb alloy underwent metastable phase transformation to an fcc phase, which could be associated with regions having a specific morphology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.