Metamaterial-Inspired 0.22 THz Traveling-Wave Tubes With Double Sheet Beams

Abstract

To develop high power and compact terahertz (THz) sheet beam traveling-wave tube (TWT), an all-metal metamaterial (MTM)-inspired slow wave structure (SWS) is proposed. This MTM-inspired SWS exhibits obvious advantages such as high interaction impedance, double beam tunnels, and compactness. The MTM-inspired SWS is devised and then simulated. The calculated average interaction impedance of the SWS for the first spatial harmonic of the fundamental mode is over <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$5 \Omega $ </tex-math></inline-formula> in the frequency range of 0.21–0.226 THz, which is bigger than that of the counterparts. Further, the beam-wave interaction of the MTM-inspired 0.22 THz TWT with double sheet beams is simulated. The maximum output power is predicted to be 400 W with 3-dB bandwidth of 5.4 GHz when the input power is 100 mW. Most importantly, the total length of the interaction structure of the 0.22 THz TWT is only 29.2 mm. The cross section of the proposed SWS and beam tunnels are <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$0.5\times0.42$ </tex-math></inline-formula> mm and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$0.5\times0.37$ </tex-math></inline-formula> mm, respectively. The simulation results show that the compact THz radiation source presented here is promising for future applications such as in imaging and material analysis.