Metalorganic Vapor‐Phase Epitaxy of +c/−c GaN Polarity Inverted Bilayer for Transverse Quasi‐Phase‐Matched Wavelength Conversion Device

Abstract

Photon‐pair generation based on optical parametric down‐conversion has attracted for the application as a light source for quantum information. Highly efficient wavelength‐conversion devices require a polarity‐inversion structure when using nitride semiconductors. A transverse quasi‐phase‐matching (QPM) polarity‐inverted GaN bilayer channel waveguide device is suitable for efficient wavelength conversion. This study designed a cross‐section device to satisfy the modal dispersion phase‐matching condition between the TM02 mode pump light and the TM00 mode signal/idler light. Moreover, an AlN oxidation interlayer fabricates the Ga‐polar/N‐polar (+c/−c) GaN layers via metalorganic vapor‐phase epitaxy (MOVPE). A 145 nm thick film layer with a macro‐step‐free surface is grown by optimizing the −c‐GaN growth conditions and reducing the substrate off‐angle to 0.2°. Next, the AlN layer is oxidized in an electric furnace and MOVPE is used to regrow a 1500 nm thick +c‐GaN layer. A macrosteps‐free surface can be achieved by reducing the off‐angle to 0.2° and optimizing the −c‐GaN growth conditions to avoid hillock formation. These results pave the way for improving the efficiency of GaN transverse QPM wavelength‐conversion devices.